Beam Shout ts Betriebsanweisung PDF herunterladen (Seite 32)

SHOUT ts User’s Manual Version 1.0.1

Favorites option lets user select any icon to appear on the bottom of the home

screen. This allows quick and easy access to the most frequently used options. A

maximum of four active favorite icons are allowed.

Format option is used to select one of four different GPS position formats to be

displayed on the LCD screen. This option is not to be confused with the Format

option under Tracking, which defines the format of position report to be

transmitted to a NOC.

Include GPS option forces the SHOUT ts to attach GPS location to Check-In,

canned and free-text messages. Under default setting, these messages do not

have GPS information included. Messages with GPS location included can take

longer to complete since the ts has to acquire a GPS fix first. Depending on the

validity of the stored ephemeris data, it could take an additional 29 seconds.

Only English is available.

The SHOUT ts has a single status LED on the bottom left corner to alert user

of whether the device is in tracking mode or emergency mode. The LED flashes

once every five seconds when Track On/Off is enabled and the device sleeps in

between tracking reports. The LED turns solid green when Emergency mode is

enabled regardless of whether the device is on or off. The LED can be turned off

for either of these two cases to save battery power using the LED option. The ts

consumes approximately 3mA less with the LED disabled during emergency and

125A less with LED disabled during tracking mode.

Reset option restores all setup parameters back to the manufacturer’s settings.

When Reset is selected, a screen will appear with the current settings and user

will be asked to confirm whether or not to reset these current settings back to the

manufacturer’s default settings.

Search option allows user to set the search parameters for the contact list and

mailboxes. The contact list or address book can be set to be searched by name,

email address, phone number or location. Similar options are available for the

mailboxes.

Security option is used to enable or disable the power up PIN code. The PIN code

is a user-selected, up to four digit number, and must be provided at power up if

security is enabled.

Language

Favorites

Format

Inc GPS

LED

Reset

Security

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 41 42

Keine Kommentare

Beam Shout ts Betriebsanweisung Seite 32